Boom Four section
telescopic boom – base steel section and three aluminum sections for high strength and lightweight mobility.
Simple to operate, one predetermined control lever extends and retracts
all boom sections in a synchronized manner. At full extension, a 105 ft
horizontal reach is achieved, making the net reach comparable to a 36 meter
boom pump. Maintenance-free sealed roller bearings mean no time
wasted greasing; and the quick telescoping feature and versatile 360°
rotation enables immediate use once on-site, allowing for several pours
in a day.
Main Conveyor Belt
A continuous 18" (457mm) 2-ply nylon core
vulcanized spliced belt – hot melt with no staples or mechanical splices – is on
a series of highly durable pulleys. An infinitely variable belt speed control
from 0 to 10 allows the operator to select the ideal output for the task . . .
from a low 1 yard an hour up to a maximum rated 360 cubic yards an hour
(275m3/hr). A tungsten carbide scraping plate at the discharge end helps scrape
materials back into the trunk and down into the pour.
Feeder Belt A
versatile 3-section 40 ft (12.19m)
hydraulic feed conveyor with 360° rotation allows materials to
be
loaded from virtually any position desired. Feed the 18" (457mm)
belt
via mixer truck, dump truck, skid-steer loader or front-end
loader. A
sturdy UHMW polyethylene feeder hopper can accommodate the
toughest of mixes as well as aggregates from sand to 4" (100mm)
rock – with no priming necessary. And when moving on-site,
simply
place the feed conveyor in the travel mode bracket at the front
of the
truck for easy relocation. Boom Control and Operation
Main conveyor functions are
controlled through a
Modular
Boom
Control
(MBC) system. Unlike astacked valve arrangement this unique modular approach allows maintenance on a single valve without removing the entire valve assembly. This reduces labor and parts costs, yet improves
overall machine control. All boom and belt functions are at the operator’s fingertips via the lightweight standard proportional radio remote control. This ergonomic design features main conveyor rotation and
elevation; main conveyor telescopic functions; main and feeder on/off and
variable independent belt speed control. Additionally, the TB 105 comes
with a standard "black and white" 90 ft (27m) cable remote for sites
that do not permit the use of the radio remote. The unit is also
equipped with an operator’s control station from where all functions can be
operated manually in emergency situations.
Handling Concrete Mixes
Due to the unique style of conveying, keep mix designs
matched exactly to customer specs. As admixtures are not needed to help place
concrete, the TB 105 can convey harsh mixes from 0" to 12" (305mm) slumps
without worry of inconsistency.
Trunk or End Hose
Telebelt conveyor design allows for smooth, surge-free flow from the 15 ft (4.57m) trunk to reduce
labor costs and make life easier on the hoseman. Both 8" (200mm) and
12" (305mm) tremies, which are steel cones at the tip end of the
main conveyor, and 8" and 12" delivery trunks, and end hoses with
chain binders to connect them, come as standard equipment. For larger volume pours and rock jobs, the 12" package is the ideal choice
with a simple and quick interchangeable design.
Power
Four (4)
hydraulic circuits are driven by two full horsepower air shift rear PTOs from the Mack E-7 350 hp truck engine. A low
rpm and only 150 hp is needed to run the Telebelt at full capacity
for reduced noise levels, less fuel consumption and lowered
maintenance costs.
Outriggers
Unique "butterfly" design outriggers allow quick and easy setup in congested areas, whether on solid or rough terrain. This helps to quickly complete pours from one convenient setup location and eliminate the need for all-wheel drive mixer trucks. Front and rear outriggers manually swing-out and hydraulically extend up or down. Activate the outrigger controls from behind the cab or from the touch pad control mounted on each outrigger for added convenience.
Pusher Axle
A
standard air-actuated pusher axle helps the Telebelt TB 105 legally meet federal bridge formula weight
requirements in most states.
Clean Out
For a quick and basically self-cleaning process, just run water into the feeder hopper and up the belt. A high pressure 2500 psi (173 bar) hydraulically-driven water system with a large capacity 200 gallon (757L) water tank greatly assist the process. And remember, with conveying, no additional concrete must be disposed of when finished with the job so you order only what you need . . . savings that add up daily.
Additional Standard Features
Transfer chute, aluminum diamond plate deck work platforms, large side-mounted aluminum tool boxes, emergency stop button, high quality paint finish, operator manuals and ship-away kit are in addition to all the standard features mentioned above.
Options
Rock hopper,
front-end loader hopper, low profile hopper, side loading channels, and custom paint schemes are optional. Consult factory for options not listed.
105 ft Horizontal Reach
18" (457mm) Conveyor Belt Width
Max. Rated Output up to 360 yd3/hr (275m3/hr)
Handle Concrete from 0" to 12" Slumps (0 to 305mm)
Place Materials Sized from Sand to 4" (100mm) Rock
Setup and Operate Under Low 16 ft (4.8m) Heights